Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Octagonal ivory table kit comes with a 19-3/8" diameter table top and 26" stainless steel leg to provide extra table space for your boat. 4 Cup holders with drain holes are built in. Resists sun, salt, and corrosion. Easy to clean.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this Jif Marine boat table. So this one's going to be an octagon shape. It's going to be a good addition to your boat to have more spots for your drinks or for something to eat off of. Let's check it out. The table's going to have four cup holders.
They work really well. I got a canned water here, and you can see it holds it just fine. It goes deep enough in there, and a bottled water. It wobbles around a little bit, but it's deep enough to keep it in place. You have a surface area up here you can use too.
You can set up your sandwich if you're eating here or you're gonna play some cards you can do that here. It's just nice to have a surface area to use on your boat that's temporary, because you can just pop this off when you're not wanting to use it and get it out of the way. Now, you do have to drill into the floor of your boat to get the mounting plate on there. But you can still take the pole and the actual table part out when you don't want it around. The table itself is going to be made of a high impact plastic.
So it is heavy duty. It doesn't seem super flimsy. If I push down on it, doesn't feel like it's going to break. So I want to know that it's going to hold up, but again, it's just pretty much for more surface area in your boat, doesn't have too be heavy duty. Just want to hold some drinks and not wobble around.
Another good spot for the table would be at the back of the boat so that the driver can use it too. To put their beverage here, or the people sitting in the backseat here have table space as well. Looking closer at it, it's not just a flat plastic. It has a wood grain texture to it. So that gives a little bit of grip of things you set up there, and just lets it not look like a plain old plastic table. After taking our waters out you can see there is some condensation or leak that came down here. That's why there are holes in the cup holder. So that's going help get that water out of there. So it won't just stay at the bottom of the cup holder. I'll talk about how easy it is to store. I figure I'll go ahead and show you. So we got some room between our driving console here and the side of the boat. So just set the pipe down first, and then also the table top. So now it's out of the way, and you have all this open space again. Something to keep in mind is I would go ahead and test it around the boat with the setup like we have here. We don't have it installed today because you do have to drill those holes in there. So we're not gonna drill into the boat. But, this would be a good way to set it here for a second see if it's in the way when you're turning the chair or if it's just gonna be comfortable where you're setting it. Now, when you go to install you are going to have to get your own hardware. It doesn't come with it. But check out how you would install it. So this is the base you're going to use with it. You're going to need six screws to run into your boat. So you're going to put this down. We're going to set ours right about there. So that's where we drill our holes to permanently install it. So even when it's not in use you can take the pipe and the table off. So this is the only part that's going to be visible on your boat. So you'll have to watch out for walking over it. But otherwise I like that the table's not permanently in the way. You can always move it if you don't want it there. But when you're going set it up all you're going to have to do is put our pipe in, push down on there. Now we're ready to put our table portion into place. You have the hole here that goes on the pipe. Okay. Start on there. Doesn't hurt to stand up and then push down. It goes into place. Overall. I like the table. I like the semi-permanent design, where yeah, I do have the drill holes in the boat. Don't really want to do that, but I like that I can remove the table and the post whenever I need to. So it's not here in the way all the time but I got it when I need it. So if everybody's hanging out in the beach I'm just going to sit here in the boat. I got a place to put my drinks and set some food or throw out some cards if I need to. Well, I think that does it. Thanks for hanging out. Hope this helped..
Average Customer Rating: 5.0 out of 5 stars (9 Customer Reviews)
Octagonal ivory table kit comes with a 19-3/8" diameter table top and 26" stainless steel leg to provide extra table space for your boat. 4 Cup holders with drain holes are built in. Resists sun, salt, and corrosion. Easy to clean.Excellent table for the price! Fits perfectly onto the base, and is sturdy enough to hold 4 drinks and more! I see some reviews state the base or table top is “loose.” Mine was not. It fit snug into the base and the underside of the table.
Bill
6/19/2023
Still very pleased with the table! We use it frequently. It’s easy to set up when needed or remove when not. Pretty sure I’ll be adding another table to front area between seats.
Table was delivered quickly and is exactly what was described. Love it in our class C motor home in place of the big ugly one coachman had in there.
Thanx."perfect"
Never too early to plan and dream about boating season, especially this year. Cant wait to put this table into action, the 4 cupholders will be a great addition to our meals and cocktail hours. We currently have a single circular table for either bow or stern seating area, so this will add versatility to have family or friends enjoy both areas at the same time. Launch 2020 cant come soon enough!
I installed this in my pontoon which didn’t have a table previously. It works great and has been used extensively this summer. Zer complaints.
Just as advertised. Nice, easy to install table. Almost no maintenance, Light weight, yet strong enough. Quick delivery I am happy.
Absolutely a good product at the right price
Do you have a question about this Boat Table?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill
10/9/2022
Excellent value for the original replacement! Has held up extremely well during the hot summer! The base WAS NOT loose, nor was the table itself. Great replacement option!!